Drainage Electric Pump

Deep water well pump

• Model No.: 150QJ10

Deep water well pump has been widely used. Our company can customize all kinds of needs. After replacing the bearings and mechanical seals of the submersible pump, the low replay of the rotor and the pump shaft should be paid attention to in the assembly process to avoid the damage of the stator winding and the...

Contact Now

Multilevel submersible drainage electric pump

• Model No.: 150QJ/L5

The pump body impeller and the motor of the driving impeller are all submerged into the water, and there are two kinds of pumps, deep well and working face. The pump body impeller and the motor of the driving impeller are all submerged into the water, and there are two kinds of pumps, deep well and working face. The...

Contact Now

Submersible pump in oil field

• Model No.: 150QJ5

QJ series submersible pump is an important equipment which is widely used in deep well water extraction and farmland irrigation in urban and industrial enterprises. The product is reasonable in design, compact in structure, and into water with motor and pump. It has small noise, long life, small volume, reliable...

Contact Now

Blade wheel drainage electric pump

• Model No.: 200QJ/L50

The upper part of the submersible motor shaft is provided with a labyrinth sand protection device and a reverse skeleton oil seal to prevent sand flowing into the motor. The submersible motor uses water lubricated bearings, the lower part is equipped with rubber pressure regulating film and pressure regulating spring,...

Contact Now

Electric Submersible Pump Unit Accessories

• Model No.: 338series

The submersible pump is a multistage centrifugal pump. It is suitable for 41/2 "and the above casing. At 50 hertz, the displacement range is 20-3000m3/d. The variable frequency device can be used to get a larger displacement. The advanced CAD design is used for the guide wheel of the submersible pump. The single stage...

Contact Now

Multistage submersible centrifugal pump

• Model No.: 338series 41/2"

The electric submersible pump consists of three parts: the underground part, the ground part and the middle part of the underground and the ground. The downhole part is the main unit of the submersible electric pump. It consists of three parts: multi-stage centrifugal pump, protector and submersible motor, playing the...

Contact Now

Submersible electric pump separator

• Model No.: 338/387/400/540/675

In order to ensure normal operation of centrifugal pumps in gas wells, oil and gas separators are usually installed between pumps and protectors. According to the gas bearing condition of the oil well, the sedimentation type oil gas separator or rotary oil and gas separator can be selected. The use of a double stage...

Contact Now

Settlement type double stage electric pump separator

• Model No.: 675series

Our company is the main design and manufacturer of international electric pump and leaf guide wheel. For many years, we have been devoted to the manufacture and research and development of the submersible pump and its accessories, water injection pump, screw pump, plunger pump, conventional pump, combined pump and so...

Contact Now

Electric submersible pump unit protector

• Model No.: 375/387/400/540series

the electric submersible pump unit, the protector works between the separator or the suction port and the motor. Besides the connecting function, its main functions are: 1, sealed submersible power output end of the motor shaft, to prevent fluid into the motor; 2, balanced casing annular space and the pressure inside...

Contact Now

The temperature sensor of the submersible pump

• Model No.: Downhole Sensor

Downhole sensor of ESP is a measuring device of downhole signal,which uses multiple sensors and signal processing circuit fixed in a sealed unit,and which is connected with the bottom end of the submersible motor.Downhole sensor monitor the downhole pressure,temperature,pump outlet pressure,vibration unit,unit...

Contact Now

Submersible electric pump lead cable

• Model No.: 375/456/540/562

The lead cable is used to connect the connecting cable between the submersible motor and the submersible cable. The working condition of the oil well is abominable, and it is often in the environment of high temperature, high pressure, oil and gas and so on. Submersible chestnut power cable can be divided into two...

Contact Now

Electric submersible electric pump cable

• Model No.: QYPN/QYPF/QYEQ/QYEQ /QYYEQ/QYEQNY/QYEQEY/QYPNY/QYENY/QYEEY

QYPN: modified polypropylene insulation, nitrile rubber sheathed power flat cable for submersible electric pumps. This product is suitable for power supply for submersible pump units with rated voltage not exceeding 3kV or 6kV. The long-term working temperature of the conductor is 90 degrees C, with excellent oil...

Contact Now