Centrifugal Pump Oil Type

pump impeller small flow impeller

• Model No.: 1000series

The blade guide wheel produced by our company adopts advanced CAD software design, and uses the CAM five axis machining mould to ensure the stability and accuracy of the product line of the blade guide wheel. At the same time, the user provides the three hydraulic performance parameters of the head, flow and...

Contact Now

Leaf wheeled submersible pump

• Model No.: 200QJ50

The installation steps of the submersible pump 1. acceptance of deep well submersible pump: users should check carefully when picking up the goods to the logistics company to see if there is any damage to the outer skin of the cable. The water pump has no breakage. 2. loading and unloading: loading and unloading...

Contact Now

Blade wheel drainage electric pump

• Model No.: 200QJ/L50

The upper part of the submersible motor shaft is provided with a labyrinth sand protection device and a reverse skeleton oil seal to prevent sand flowing into the motor. The submersible motor uses water lubricated bearings, the lower part is equipped with rubber pressure regulating film and pressure regulating spring,...

Contact Now

Settlement type double stage electric pump separator

• Model No.: 675series

Our company is the main design and manufacturer of international electric pump and leaf guide wheel. For many years, we have been devoted to the manufacture and research and development of the submersible pump and its accessories, water injection pump, screw pump, plunger pump, conventional pump, combined pump and so...

Contact Now

Axial type high pressure reciprocating plunger pump

• Model No.: RHX5ZB

The pump is based on 5ZB-12/42 pump, with high inheritance coefficient and "ZL0520123325.5" patent at the end of hydraulic pressure. The pump is designed as "high pressure water injection multi cavity reciprocating combined body pump head". The pump is simple in structure, reliable in work, convenient in operation and...

Contact Now

Internal mesh volume pump

• Model No.: G40 series

Single screw pump is a kind of method of the displacement of the rotor pump, when the rigid rotor of the screw within the elastic stator cavity as a planet revolving movement, both the sealed cavity formed between the axial movement, convey the medium from the pump suction side is smooth and continuous conveying to...

Contact Now

ZYZSB type pressurized water injection pump

• Model No.: ZYZSB-D
• Transportation: Ocean,Land,Air

Tianjin Rong Heng Group Limited by Share Ltd (Rong Heng Group, RongHeng Group) is a listed company focused on oil drilling equipment manufacturing. The company set up its factory in 1982 and became a Limited by Share Ltd in 1999. In 2008, it was named "high-tech enterprise in Tianjin" by the Tianjin municipal...

Contact Now

Oil and gas separator for submersible pump

• Model No.: 338series

The oil and gas separator is a connecting device between the pump and the protector. In order to ensure the continuous normal operation of the multistage centrifugal pump in the oil well with gas, it is the normal flow into the pump to reduce the effect of gas on the working pump. If user demand for sand control and...

Contact Now

Blade wheel type single stage submersible pump

• Model No.: 300QJ/L320

Well submersible pump is a water pump which is directly connected with the motor and water pump and works in water. It is suitable for extracting groundwater from deep wells or in rivers, reservoirs and aqueducts. It is mainly used for farmland irrigation and human livestock water in mountain areas. It can also be...

Contact Now

Settlement type submersible electric pump protector

• Model No.: 400series

The basic structure of the protector can be divided into: precipitated protector, capsule protector, and parallel type protector. According to the geological conditions and requirements, the structure of the protector can also be freely combined into a combination protector, such as sedimentation and capsule, double...

Contact Now

Production of electric submersible pump protector

Our company's independent design and completion of the capsule type submersible pump protector is widely used in the field, the response is also very excellent, welcome your consultation and long-term cooperation. The basic structure of the protector can be divided into: precipitated protector, capsule protector, and...

Contact Now

Capsule protector for submersible pump

Rong Heng Group has been adhering to the principle of honesty, trustworthiness and customer first, providing strong support and logistical support to the masses with excellent service quality.Our company's independent design and completion of the capsule type submersible pump protector is widely used in the field, the...

Contact Now